Marking and Measuring

Showing 1-12 of 12 item(s)

Axminster Precision Ruler Square/Stop - 2298 -

Tape & Rule Accessories

Axminster Professional Ruler Square/Stop

Axminster Professional

Precision machined anodised aluminium body for years of useBrass locking screw won’t damage steel ruleConvert steel rule into a precision marking/measuring toolSingle knurled brass knob allows quick adjustmentsBody size is 50 x 19 x 19mmFits standard steel rule from 22mm (7/8") to 30mm (1.3/16") wide

Stair Gauge Set - 1900 - - Pair...

Gauge Accessories

Axminster Workshop Stair Gauge Set

Axminster Workshop

Pair of brass stopsSimply clamp to a rafter squareProvides fast, repetitive setting out of angles

Marking/Mortice Gauge Heads - 4089 -

Gauge Accessories

Marking/Mortice Gauge Heads

Designed for use with the Veritas Wheel Marking GaugesWill fit any wheel-marking gauge with a 5/16" dia. RodHardened carbon steel cutters 16mm diameterCutters slice wood fibres for clean, accurate linesAccurate mortice sizing and chisel registrationShaft collar included ensures prevents accidental tilting in useSupplied as a pair of cutters with a shaft...

Stabila LT30 - Telescopic Laser Pole 135-365cm - 2499 -

Level Accessories

Stabila LT30 - Telescopic Laser Pole 135-365cm

Professional Telescopic Laser Pole all steel constructionTwist-lock for rapid adjustment, lever handle locks in positionMounting-platform includes 1/4" x 20 and 5/8" x 11 tripod threadsSuitable for many other brands of laser levelDoubles up as a temporary prop, max loading of 30kgExtends from 1.35m closed to 3.65m fully extendedWeighs 2.7kg

UJK Parf Guide System Parf Stick Connector

Tape & Rule Accessories

UJK Parf Guide System Parf Stick Connector

Connects UJK Parf Sticks when drilling narrow benchesEnsures accurate layoutMaintains 3:4:5 triangle

Veritas Extension Rods for Bar Gauge Heads - 5195 -

Gauge Accessories

Veritas Extension Rods for Bar Gauge Heads

Increases the range of the Veritas Bar Gauge Set by 610mmUseful when comparing the diagonals of larger projectsEach pack comprises 2 x 305mm rodsMade in Canada

Veritas Metric Bevel Setter - 3992 -

Tape & Rule Accessories

Veritas Metric Bevel Setter

Stainless steelAllows a sliding bevel to be set at any angle from 1° to 60° in 1/2° incrementsCan be used in conjunction with a bevel to check existing anglesThe reverse has common dovetail and polygon anglesMetric Graduations

Veritas Rod for Micro-Adjust Wheel Marking Gauge

Gauge Accessories

Veritas Rod for Micro-Adjust Wheel Marking Gauge

Upgrade for the Veritas standard wheel-marking gaugeStainless-steel rod with built-in fine adjustmentAllows fine-tuning of cutter projectionFine-pitch internal thread for precise setting

Veritas Rule Stop - 4747 - -...

Tape & Rule Accessories

Veritas Rule Stop

For setting saw fences, repeat cuts etcSlide the stop over the rule end and tightenWill not mar the rule's edgeKnurled tip of brass adjustment screwSecurely clamps even the thinnest rulesRepositioning is fast and easyAnodised & contoured aluminium bodySuits rules from 22mm(7/8") to 28.5mm(1.1/8") wideUp to 1.25mm(0.05") thickMade in Canada

Veritas Shaft Clamp for Dual Marking Gauge - 6944 -

Gauge Accessories

Veritas Shaft Clamp for Dual Marking Gauge

Lock the relative position of the two rodsMachined to precise tolerances to prevent binding on the rods13mm long collar is made from extruded aluminiumTurned brass thumbscrewMade in Canada

Veritas Square Fence - 4709 - -...

Tape & Rule Accessories

Veritas Square Fence

200mm long aluminium extrusion easily attaches with brass screwsSquare fence face aligns with the edge of the workOne side offers a 25mm high face, the opposite side has a 6mm faceIdeal for use on round edge material and sheet stock

Veritas Wheel for Marking Gauges - 4788 -

Gauge Accessories

Veritas Wheel for Marking Gauges

Replacement wheel for Veritas gaugesMade in Canada

Filter by

Product added to wishlist

Product added to compare.