Drilling & Milling

Showing 1-18 of 49 item(s)

Axminster Professional Drill Vices

UK warehouse: Delivery 7-10 B. days!

Drilling & Milling Vices

Axminster Professional Drill Vices

Axminster Professional

Made from graded cast ironLong mounting slots for easy adjustment on the tableFixed jaw with horizontal and vertical V-slots for round materialJaws have a seat for retaining flat and low height work pieces

Axminster 13mm Keyed Chuck & Arbors - 771 -

Central warehouse: Low stock!

Accessories for Pillar Drills

Axminster Woodturning 13mm Keyed Chuck & Arbors

Axminster Woodturning

Good quality key operated chucks offering excellent valueAvailable complete with a choice of arborAn excellent accessory for boring on a woodturning latheJaw capcity 1mm to 13mm

Collets for Junior Chuck - 478 -

Collets & Collet Holders

Axminster Woodturning ER20 Collets for Junior Chuck

Axminster Woodturning

Collets for the Axminster junior chuckER20 engineering collets covering a range of sizes from 6-13mmCollets grip over a diameter range of 1mm without loss of accuracyArbors and Collet nuts available separately

Axminster 13mm Keyed Chuck - 6107 -

Accessories for Pillar Drills

Axminster Workshop 13mm Keyed Chuck - B16

Axminster Workshop

Good quality keyed chuck, B16 arbor fittingJaw opening range is 1mm to13mmSuitable for use in pillar drills and lathesA choice of arbors available separately

Axminster Workshop 13mm Keyless Chuck

Accessories for Pillar Drills

Axminster Workshop 13mm Keyless Chuck

Axminster Workshop

Rugged, all steel drill chucks, all with B16 mounting tapersSuitable for use in drill presses, milling machines or all types of lathesJaw opening range is 0-13mmChucks fit the optional B16- 1, 2 or 3MT arbors listed separately

Axminster Workshop 16mm Keyless Chuck

Accessories for Pillar Drills

Axminster Workshop 16mm Keyless Chuck

Axminster Workshop

Rugged, all steel drill chucks, all with B16 mounting tapersSuitable for use in drill presses, milling machines or all types of lathesJaw opening range is 3-16mmChucks fit the optional B16- 1, 2 or 3MT arbors listed separately

Axminster Workshop Drill Press Table

Accessories for Pillar Drills

Axminster Workshop Drill Press Table

Axminster Workshop

Upgrade to a woodworking friendly drill press tableUniversal design fits a wide range of drill pressesLarge work surface for greater supportAdjustable fence and sliding stop block for repeat drillingSuitable for drill press tables up to 450mm wide and 50mm thick

Axminster Workshop Jobber Drill Bits

Central warehouse: Low stock!

Engineering Drill Bits

Axminster Workshop Jobber Drill Bits

Axminster Workshop

Top quality HSS drill bits made to DIN338 standardsWide flute design for good chip evacuationPoint designed to self-centre, TiN coating for longer tool lifeAvailable in 1-13mm in 0.5mm incrementsPlus popular tapping drill sizesCan drill in steel, cast steel alloyed and non-alloyed, grey cast iron, graphite and malleable cast ironWith the application of...

Morticing Attachment - 5937 - -...

Accessories for Pillar Drills

Axminster Workshop Morticing Attachment

Axminster Workshop

Converts a pillar drill into a lightweight morticing machineFits onto the collar where the chuck guard is normally mounted65mm mounting diameter mounting bracketLoose adaptors also supplied for 60mm and 55mm diameter collarsBest fitted using an MDF mounting plate, (not supplied)Not suitable for use with the Axminster Workshop & Professional pillar drills,...

Pillar Drill Chuck Guards - 1028 -

UK warehouse: Delivery 7-10 B. days!

Accessories for Pillar Drills

Axminster Workshop Pillar Drill Chuck Guards

Axminster Workshop

A range of chuck guards for most pillar drill sold todayAvailable in collar sizes from 40-92mmFlip-up design and clear perspex guard, adjustable for heightPlease measure your drill presses collar before ordering

Axminster Universal Drill Chuck Guard - 2587 -

Accessories for Pillar Drills

Axminster Workshop Universal Drill Chuck Guard

Axminster Workshop

A universal drill chuck guard for many pillar drills or vertical millsMounting bracket included, fits with just two boltsRotary switch included for interlocking with your machine's NVR switchLarge, transparent shield gives a clear view of your workFitted as standard to many of our Engineer Series pillar drills

Proxxon 3 Piece HSS Centre Drill Set - 4765 -

Tooling

PROXXON 3 Piece HSS Centre Drill Set

DIN 333 (type A) 60°Complete setSizes: 2.0, 2.5 and 3.15mm

Proxxon 3 Piece Tungsten Milling Cutter Set - 4318 -

Tooling

PROXXON 3 Piece Tungsten Milling Cutter Set

Double flute cutters made of solid tungstenClockwise cuttingFishtail profile ensures cutting to the centreUsable on cast iron, hardened cast iron, steel, brass, aluminium, glass, plastics and carbon fibreOne of each: 1.0, 2.0 and 3.0mmShaft dia. 3mmSupplied in a protective box

Proxxon 4 Piece Milling Cutter Set (2 - 5mm) - 4644 -

Tooling

PROXXON 4 Piece Milling Cutter Set (2 - 5mm)

All 6mm shankSizes: 2, 3, 4, & 5mm diameterHSS Double fluted, DIN327Supplied in wooden box

Proxxon 4 Piece Milling Cutter Set (6 - 10mm) - 4645 -

Tooling

PROXXON 4 Piece Milling Cutter Set (6 - 10mm)

HSS four flute, DIN844; sizes: 6, 7, 8, & 10mm diameter6mm cutter has 6mm shank7mm, 8mm & 10mm cutters have 10mm shankSupplied in wooden box

Proxxon 5 Piece Collet Set for PF 230 & FF 230 - 4622 -

Collets & Collet Holders

PROXXON 5 Piece Collet Set for PF 230 & FF 230

1 each: 2.4, 3.0, 3.2, 4.0 & 5.0mmSupplied in wooden box

PROXXON 5 Piece ER16 Collet Set for FF250/PF250

Collets & Collet Holders

PROXXON 5 Piece ER16 Collet Set for FF250/PF250

ER16 (DIN ISO 15488) precision colletsHardened, ground, polished and checked for concentricity1 of each Ø 2,4 - 3 - 3,2 - 4 and 5mmSupplied in a wooden box with sliding lid

PROXXON Automatic Universal Axial Feed AV/E

Accessories for Micro Drills

PROXXON Automatic Universal Axial Feed AV/E

Automatic power feed for controlled millingFits onto the X-axis of the FF 500/BL MillAlso fits KT 400 Compound Table and FF 400 MillSimple assembly and setupDC motor with electronic speed control2 speed ranges; general work or high speed machining

Product added to wishlist

Product added to compare.