List of products by brand UJK

UJK Air Wedge - Wide 260mm 🪚 Premium Woodworking Equipment | JetTools.bg

On sale!

Air Wedges

UJK Air Wedge - Wide 260mm

Inflatable shims with dozens of usesFor fitting, fixing or levelling; slimline, slides into a 2mm gapHand operated for controlled inflationHard-wearing, non-marring materialSealed and glued with TPU and high frequency weldingWide: size 260mm x 140mm, lift 2mm to 85mm

UJK Air Wedges - Mixed Shapes (Pkt 3) 🪚 Premium Woodworking Equipment | JetTools.bg

Air Wedges

UJK Air Wedges - Mixed Shapes (Pkt 3)

Inflatable shims with dozens of usesFor fitting, fixing or levelling; slimline, slides into a 2mm gapHand operated for controlled inflationHard-wearing, non-marring material1 x Slim: size 100mm x 140mm, lift 2mm to 45mm1 x Square: size 160mm x 145mm, lift 2mm to 55mm1 x Wide: size 260mm x 140mm, lift 2mm to 85mm

UJK Air Wedges - Square 160mm (Pkt 2) 🪚 Premium Woodworking Equipment | JetTools.bg

Air Wedges

UJK Air Wedges - Square 160mm (Pkt 2)

Inflatable shims with dozens of usesFor fitting, fixing or levelling; slimline, slides into a 2mm gapHand operated for controlled inflationHard-wearing, non-marring materialSealed and glued with TPU and high frequency weldingSquare: size 160mm x 145mm, lift 2mm to 55mm

UJK Aligning Pins For Worktop Jigs 🪚 Premium Woodworking Equipment | JetTools.bg

Router Jigs & Templates

UJK Aligning Pins For Worktop Jigs

Pack of 4 ABS plastic aligning pinsAccurately locate a worktop jig in positionSnug fit in jig’s location holes10mm diameter and 50.5mm long with 12mm headFor UJK jigs and other brands

Multifunction Workbench Fittings

UJK Aluminium Low Profile Parf Dog (Pkt 2)

10mm low profile dogs for multifunction workbenches25mm diameter, hardened aluminium for durabilityUseful stops when planing, sanding etc.

UJK Angle Adjustment Plate For Worktop Jigs 🪚 Premium Woodworking Equipment | JetTools.bg

Router Jigs & Templates

UJK Angle Adjustment Plate For Worktop Jigs

Accessory for the UJK Variable Angle Worktop JigEliminates guesswork when cutting a joint to fit walls not quite squareFinds and sets the angle required, produces a perfectly matched jointCNC machined from durable aluminiumAllow adjustments to produce accurate joints with internal angles between 85° to 95°

UJK Anti-Slip Workbench Protection Dogs (8) 🪚 Premium Woodworking Equipment | JetTools.bg

Multifunction Workbench Fittings

UJK Anti-Slip Workbench Protection Dogs (8)

Avoid scoring the top of a workbench or MFT when sawingHigh friction anti-slip pads help keep work in placeFor multifunction and MFT workbenches with 20mm chamfered dog holes

UJK Assembly Square 🪚 Premium Woodworking Equipment | JetTools.bg

Bench Dogs & Holdfasts

UJK Assembly Square

Truly useful accessory for a multifunction tableUse to hold parts at exact right anglesThick HDF Valchromat, durable and stableCNC machining guarantees accuracy360mm long legs at 90°Forms a reference for a fast, accurate setup for mitre cuts with guide rail

UJK Assembly Squares with Clamping Holes - (Pair) 🪚 Premium Woodworking Equipment | JetTools.bg

Carpenter's Squares

UJK Assembly Squares with Clamping Holes - (Pair)

Precisely machined solid anodised aluminiumHold parts at exact right angles for assembly and fixingAllows checking and setting of 90° for blades and fences

UJK Back To Back Adaptors 🪚 Premium Woodworking Equipment | JetTools.bg

Guide Clamps

UJK Back To Back Adaptors

Join two UJK Progrip Guide Clamps back to backLower clamp grips bench, upper clamp holds the workTurns 2 guide clamps into an effective bench top holding deviceSupplied as a pack of 8

UJK Backstop 🪚 Premium Woodworking Equipment | JetTools.bg

Bench Dogs & Holdfasts

UJK Backstop

Use on any multifunction table with 20mm holes at 96mm centresCNC machined from durable, HDF ValchromatUseful stop or assembly aid200mm long x 30mm wide x 20mm thick3 dog holes allow straight or diagonal placementAll 20mm holes are chamferedMade in the UK

UJK Bandsaw Buddy 🪚 Premium Woodworking Equipment | JetTools.bg

Bandsaw Accessories

UJK Bandsaw Buddy

Designed and made in AxminsterUnique bandsaw blade aligning toolChecks the alignment of blade to the face of the fenceRare earth magnets hold it firmly on the blade250mm long makes it easy to spot any discrepancyScale on the tip helps set fence for cutting veneers or thin boardsHoles for drawing circles in 25mm steps from 75 to 400mmAccurately machined...

UJK Blank Universal Sub-Base 🪚 Premium Woodworking Equipment | JetTools.bg

Router Sub-Bases

UJK Blank Universal Sub-Base

Customisable base, fits all routersIncreased safety and stability when handheld routingDrill your own countersunk holes to fit your router modelPhenolic sub base increases stability and torsion resistanceMachined to high tolerances for perfect accuracyAccepts euro style guide bushes and adaptorsMade in Britain

UJK Cam & Wedge Clamping Set 🪚 Premium Woodworking Equipment | JetTools.bg

Bench Dogs & Holdfasts

UJK Cam & Wedge Clamping Set

Truly useful accessory for a multifunction tableHolds workpieces without any surface obstructionUseful for sanding, routing, carving etcSet includes 3 stainless steel 12mm Guide PupsPhenolic resin Surface Cam ClampHDF Valchromat, wedges, backstop and spacer

UJK Cam Lock Hold Down Clamp M6 (Pair) 🪚 Premium Woodworking Equipment | JetTools.bg

Clamps & Guide Rails

UJK Cam Lock Hold Down Clamp M6 (Pair)

Strong anodised aluminium leversM6 x 75mm tee-boltsEasy to use, self-locking, quick-releaseHigh clamping force; holds tightExcellent accessories for jig makingSupplied as a pack of 2

UJK Cam Lock Hold Down Clamp M8 (Pair) 🪚 Premium Woodworking Equipment | JetTools.bg

Clamps & Guide Rails

UJK Cam Lock Hold Down Clamp M8 (Pair)

Strong anodised aluminium leversM8 x 75mm T-bolt fits UJK T-TrackEasy to use, self-locking, quick-releaseHigh clamping force; holds tightExcellent accessories for jig makingSupplied as a pack of 2

UJK Centring Cone

General Routing Accessories

UJK Centring Cone

Two piece centring cone setImperial version fits 1/2" & 1/4", the metric version fits 8mm & 12mmVery useful when mounting a router into a table set upA shaft made from Stainless steelMade in Axminster, UK

UJK Centring Cone 🪚 Premium Woodworking Equipment | JetTools.bg

General Routing Accessories

UJK Centring Cone

Two piece centring cone setImperial version fits 1/2" & 1/4", the metric version fits 8mm & 12mmVery useful when mounting a router into a table set upA shaft made from Stainless steelMade in Axminster, UK

Showing 19-36 of 245 item(s)

Product added to wishlist

Product added to compare.